Compact Wheel Loaders Gain Hydraulic Capacity and Automation
CLAAS presented the updated TORION 644 SINUS and TORION 738 T SINUS wheel loaders with 96 l/min hydraulics and SMART LOADING automation.
www.claas.com

At EIMA International 2026, held from 10 to 14 November 2026 in Bologna, Italy, CLAAS showed updated versions of its TORION 644 SINUS and TORION 738 T SINUS compact wheel loaders. The revisions targeted handling capacity, operator workload during repetitive loading and working safety in poor visibility, for agricultural businesses, processing plants, biogas plants and contracting firms. Core Technology and System Architecture Both machines use the SINUS steering and chassis concept, also applied to the larger TORION 956 SINUS. It combines articulated steering with a self-steering rear axle. Because part of the steering movement is taken over by the rear axle, the articulation angle can be smaller, which improves stability and resistance to tipping while keeping a turning radius of 3.76 m over the tyres. This addresses a common conflict in compact wheel loaders, where tight manoeuvring in yards and buildings usually comes at the expense of lateral stability under load. The powertrain was carried over unchanged. A 4-cylinder Yanmar engine delivers 54 kW (73 hp) and drives the SMART SHIFTING hydrostatic ground drive with a 2-speed automatic gearbox, reaching a top speed of 38 km/h without interruption in tractive force. The working hydraulics flow rate was increased to 96 l/min, allowing faster loading cycles and smoother operation of demanding attachments. An optional additional flow of 31 l/min is available for tools with high hydraulic demand such as mulchers and sweeping brushes. A 120 A alternator is now standard to supply higher additional electrical loads. Industry Applications In the 6 to 7-tonne class, the TORION SINUS models are designed as all-round machines for loading, stacking and transport tasks. The TORION 738 T SINUS adds lift height to the SINUS manoeuvrability: its bucket pivot point reaches 4.96 m and the maximum lift height with a pallet fork is 4.80 m, relevant for high stacking and loading of trailers with tall side walls. Operator Assistance and Control Systems The TORION 644 SINUS now also features the SMART LOADING assistance system already used on the TORION 738 T SINUS. The system coordinates loader functions during repetitive work. Operators can programme lift heights and lowering heights, and an automatic bucket return brings the tool back to its set position. Continuous, proportional electro-hydraulic control provides precise actuation of the working tools. Both models now have a nine-inch display. Two freely programmable pushbuttons on the joystick and two on the side console allow functions to be assigned to suit individual operators and tasks. Operational Impact and Safety Automated end positions reduce the number of manual corrections per cycle, which shortens cycle times and reduces operator fatigue during long loading shifts. A revised LED lighting architecture, comprising optimised road lighting, LED work lights and position lights, improves visibility when operating in poor light conditions. Product Range Context CLAAS introduced its first TORION wheel loaders at Agritechnica 2017. The range now comprises five series and 12 models with operating weights from 4,600 to 20,300 kg, including the battery-electric TORION 537e SINUS, unveiled at Agritechnica 2025. Edited by Sucithra Mani, Induportals editor – adapted by AI.


